+91-9999 5737 81 +91 11 9871930011 sales@vertexinstruments.com Sitemap

Innovating Best Cyclic Cum Static Triaxial Test Unit VSLIC-S213

short info

The Vertex Cyclic Triaxial Testing system is a highly advanced combination of hydraulic and pneumatic technology where s1 is applied through hydraulic system in dynamic tests and s2 & s3 are applied through pneumatic system. It is totally based on Close Loop principle. The processing of the pre-programmed signal and machine response signal in the P.I.D. Controller is at the speed of 10 KHz. This keeps the machine working within the limits of ± 1% of the programmed signal. Confining pressure & Back pressure are also controlled through computer and operates on close loop control mechanism.

Standard

ASTM 3999 & ASTM 5311

Model

VSLIC-S213

Origin

Indian

Make/ OEM

VERTEX

get a quote  

  • Description

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL

OVERVIEW

The cyclic triaxial testing system is a highly advanced combination of hydraulic and pneumatic technology where s1 is applied through hydraulic system in dynamic tests and s2 & s3 are applied through pneumatic system. It is totally based on Close Loop principle. The processing of the pre-programmed signal and machine response signal in the P.I.D. Controller is at the speed of 10 KHz. This keeps the machine working within the limits of ± 1% of the programmed signal. Confining pressure & Back pressure are also controlled through computer and operates on close loop control mechanism.

The system is capable of performing following tests as per relevant standard ASTM/BS/AASHTO/IS etc.: Saturation, consolidation, UU, CU, CU Bar, CD Triaxial tests with pore pressure and Volume change measurement, Isotropic and Anisotropic tests, Stress & Strain Path control tests, Liquefaction test, Stress Controlled Cyclic Triaxial strength of soils, Strain Controlled Cyclic Triaxial strength of soils, determination of modulus and damping properties of soils, Resilient Modulus of soils etc. (Optional- Ko consolidation tests & Bender Element tests)

Salient Features

  • Based on SERVO CONTROLLED HYDRAULIC CLOSED LOOP FEEDBACK mechanism
  • Conforming to stringent requirement as per the International norms (ASTM 3999 & ASTM 5311)
  • Fully Computer Controlled operation to control Axial Loading, Cell Pressure & Back pressure with User friendly Software
  • Stress / Strain Controlled Cycling from 0.01 Hz to 10 Hz with 128 data sets per second
  • Dynamic Loading Range ± 50N to ± 9kN (Higher loads on request)
  • Suitable for Controlled Axial Loading in Stress/Strain basis in Static Triaxial testing to conduct UC, UU, CU, CU Bar, CD tests
  • Facility to study Liquefaction behavior of soil
  • Digitally controlled Pressure Controllers for applying Confining and Back Pressure Range 10kPa –1000kPa (Standard)
  • Suitable Triaxial cell to accommodate Sample Sizes up to 100mm diameter x 200mm height and a Cell pressure of 1000kPa (Standard)
  • Online Plotting of Graphs (Load v/s Displacement, Load v/s Time, Displacement v/s Time) with real time display of data
  • Advanced Analysis Software as per ASTM 3999 & 5311 for Cyclic testing and Routine Static Triaxial testing.


Related Searches

SPECIFICATIONS

The cyclic triaxial testing system is a highly advanced combination of hydraulic and pneumatic technology where s1 is applied through hydraulic system in dynamic tests and s2 & s3 are applied through pneumatic system. It is totally based on Close Loop principle. The processing of the pre-programmed signal and machine response signal in the P.I.D. Controller is at the speed of 10 KHz. This keeps the machine working within the limits of ± 1% of the programmed signal. Confining pressure & Back pressure are also controlled through computer and operates on close loop control mechanism.

The system is capable of performing following tests as per relevant standard ASTM/BS/AASHTO/IS etc.: Saturation, consolidation, UU, CU, CU Bar, CD Triaxial tests with pore pressure and Volume change measurement, Isotropic and Anisotropic tests, Stress & Strain Path control tests, Liquefaction test, Stress Controlled Cyclic Triaxial strength of soils, Strain Controlled Cyclic Triaxial strength of soils, determination of modulus and damping properties of soils, Resilient Modulus of soils etc. (Optional- Ko consolidation tests & Bender Element tests)

Salient Features

  • Based on SERVO CONTROLLED HYDRAULIC CLOSED LOOP FEEDBACK mechanism
  • Conforming to stringent requirement as per the International norms (ASTM 3999 & ASTM 5311)
  • Fully Computer Controlled operation to control Axial Loading, Cell Pressure & Back pressure with User friendly Software
  • Stress / Strain Controlled Cycling from 0.01 Hz to 10 Hz with 128 data sets per second
  • Dynamic Loading Range ± 50N to ± 9kN (Higher loads on request)
  • Suitable for Controlled Axial Loading in Stress/Strain basis in Static Triaxial testing to conduct UC, UU, CU, CU Bar, CD tests
  • Facility to study Liquefaction behavior of soil
  • Digitally controlled Pressure Controllers for applying Confining and Back Pressure Range 10kPa –1000kPa (Standard)
  • Suitable Triaxial cell to accommodate Sample Sizes up to 100mm diameter x 200mm height and a Cell pressure of 1000kPa (Standard)
  • Online Plotting of Graphs (Load v/s Displacement, Load v/s Time, Displacement v/s Time) with real time display of data
  • Advanced Analysis Software as per ASTM 3999 & 5311 for Cyclic testing and Routine Static Triaxial testing.

FEATURES

The cyclic triaxial testing system is a highly advanced combination of hydraulic and pneumatic technology where s1 is applied through hydraulic system in dynamic tests and s2 & s3 are applied through pneumatic system. It is totally based on Close Loop principle. The processing of the pre-programmed signal and machine response signal in the P.I.D. Controller is at the speed of 10 KHz. This keeps the machine working within the limits of ± 1% of the programmed signal. Confining pressure & Back pressure are also controlled through computer and operates on close loop control mechanism.

The system is capable of performing following tests as per relevant standard ASTM/BS/AASHTO/IS etc.: Saturation, consolidation, UU, CU, CU Bar, CD Triaxial tests with pore pressure and Volume change measurement, Isotropic and Anisotropic tests, Stress & Strain Path control tests, Liquefaction test, Stress Controlled Cyclic Triaxial strength of soils, Strain Controlled Cyclic Triaxial strength of soils, determination of modulus and damping properties of soils, Resilient Modulus of soils etc. (Optional- Ko consolidation tests & Bender Element tests)

Salient Features

  • Based on SERVO CONTROLLED HYDRAULIC CLOSED LOOP FEEDBACK mechanism
  • Conforming to stringent requirement as per the International norms (ASTM 3999 & ASTM 5311)
  • Fully Computer Controlled operation to control Axial Loading, Cell Pressure & Back pressure with User friendly Software
  • Stress / Strain Controlled Cycling from 0.01 Hz to 10 Hz with 128 data sets per second
  • Dynamic Loading Range ± 50N to ± 9kN (Higher loads on request)
  • Suitable for Controlled Axial Loading in Stress/Strain basis in Static Triaxial testing to conduct UC, UU, CU, CU Bar, CD tests
  • Facility to study Liquefaction behavior of soil
  • Digitally controlled Pressure Controllers for applying Confining and Back Pressure Range 10kPa –1000kPa (Standard)
  • Suitable Triaxial cell to accommodate Sample Sizes up to 100mm diameter x 200mm height and a Cell pressure of 1000kPa (Standard)
  • Online Plotting of Graphs (Load v/s Displacement, Load v/s Time, Displacement v/s Time) with real time display of data
  • Advanced Analysis Software as per ASTM 3999 & 5311 for Cyclic testing and Routine Static Triaxial testing.

PRODUCT VIDEO

WORKING PRINCIPALNew

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE

2023 Vertex Group. All rights reserved | Privacy | Copyright | Sitemap | MAKE IN INDIA(MII)