Shrinkage Bar Mould VSLIC-C113
short info
This Shrinkage Bar Mould-Two Gang is used for the determination of soundness. The change in length of the specimen is determined by Length Comparator listed in the concrete section.
short info
This Shrinkage Bar Mould-Two Gang is used for the determination of soundness. The change in length of the specimen is determined by Length Comparator listed in the concrete section.
AS PER IS:516:PART 2 SEC.1, for measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately
Supplied with 2 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Two Mould compartment
Supplied with 4 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Four Mould compartment
VSLIC-C113-01 : Shrinkage Bar Mould – One Gang (One Compartment)
VSLIC-C113-02 : Shrinkage Bar Mould – Two Gang (Two Compartment)
VSLIC-C113-03 : Shrinkage Bar Mould – Three Gang (Three Compartment)
VSLIC-C113-04 : Shrinkage Bar Mould – Four Gang (Four Compartment)
Stainless steel smooth or knurled and threaded reference pins as required.
AS PER IS:516:PART 2 SEC.1, for measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately
Supplied with 2 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Two Mould compartment
Supplied with 4 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Four Mould compartment
VSLIC-C113-01 : Shrinkage Bar Mould – One Gang (One Compartment)
VSLIC-C113-02 : Shrinkage Bar Mould – Two Gang (Two Compartment)
VSLIC-C113-03 : Shrinkage Bar Mould – Three Gang (Three Compartment)
VSLIC-C113-04 : Shrinkage Bar Mould – Four Gang (Four Compartment)
Stainless steel smooth or knurled and threaded reference pins as required.
AS PER IS:516:PART 2 SEC.1, for measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately
Supplied with 2 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Two Mould compartment
Supplied with 4 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Four Mould compartment
VSLIC-C113-01 : Shrinkage Bar Mould – One Gang (One Compartment)
VSLIC-C113-02 : Shrinkage Bar Mould – Two Gang (Two Compartment)
VSLIC-C113-03 : Shrinkage Bar Mould – Three Gang (Three Compartment)
VSLIC-C113-04 : Shrinkage Bar Mould – Four Gang (Four Compartment)
Stainless steel smooth or knurled and threaded reference pins as required.
AS PER IS:516:PART 2 SEC.1, for measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately
Supplied with 2 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Two Mould compartment
Supplied with 4 pair of smooth reference Point Pins, as per IS:IS:10086, IS: 4031, ASTM C 151 . Effective Gauge Length 250mm ± 2mm, Four Mould compartment
VSLIC-C113-01 : Shrinkage Bar Mould – One Gang (One Compartment)
VSLIC-C113-02 : Shrinkage Bar Mould – Two Gang (Two Compartment)
VSLIC-C113-03 : Shrinkage Bar Mould – Three Gang (Three Compartment)
VSLIC-C113-04 : Shrinkage Bar Mould – Four Gang (Four Compartment)
Stainless steel smooth or knurled and threaded reference pins as required.