short info

VERTEX MAKE high efficiency Fully Touch Automatic Compression Testing Machine With Pace Rate Control (CTM) for testing perform tests at a high concrete samples.

The Vertex test machines are hydraulically powered, using electro-hydraulic servo control technology rock, mortar, brick, concrete and other building materials to test the mechanical properties of compression, showing the loading force value, loading speed and loading curve. The test data is automatically processed, stored, and printed.

Standard

IS : 14858 (2000), EN 12390-4, ASTM C39, AASHTO T22

Model

VSLIC-452TFA

Origin

Indian

Make/ OEM

VERTEX

  • Description

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL

OVERVIEW

Compression platens

  • VSLIC-452TFA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150×300 mm and cubes up to 200 mm.
  • Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request.
  • Attachment for Paver block testing is available at extra cost.

Safety Features

  • Max. pressure valve to avoid machine overloading
  • Piston travel limit switch (Extra cost)
  • Emergency stop button

Hardware

132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional).

Power Pack:

Dual stage power pack which is controlled by is designed to supply required oil to the frames. Very silent Power pack can load a specimen between 1 kn/ sec to 20 kN/sec. On the dual stage pump high delivery low pressure pump is used for rapid approach and low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading.

If on-site training & installation is required, we will send at least two engineers (electrical & mechanical) to support in clients’ workshop.

24 Months’ Warranty
– We will warrant all the machines that we sell for 14 months from the usage of the end user.



SPECIFICATIONS

Frame for Fully Touch Automatic Compression Testing Machine With Pace Rate Control

  • Four column high stiffness welded frame tested for stability.
  • Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
  • The dimensions of the frame allow the testing of concrete cylinders up to 320 mm long x 160 mm diameter; 100, 150, 200 mm cubes.
  • Using Siemens motor, torque and speed are stable.
  • Automatic servo measurement and control system, the data is accurate and reliable.
  • Built-in radial piston oil pump, stable output and low noise.
Capacity(kN) 1000kN 2000kN 3000kN
Platen Dia (mm) 240 300 300
Ram Travel (mm) 50 50 50
Vertical Daylight (mm) 300 350 350
Horizontal Daylight (mm) 300 350 370
Cube (mm)
Cylinder (mm)
(Dia x Height)
70.6mm, 100mm, 150mm
100mm x 200mm
70.6mm, 100mm, 150mm,
10mm x 200mm, 150mm x 300mm, 160mm x 320mm
70.6mm, 100mm, 150mm,
10mm x 200mm, 150mmx 300mm, 160mm x 320mm
Weight (kg) 600 750 1180

FEATURES

Features for Fully Automatic Compression Testing Machine

  • Set test parameters – including load rate and Press the start button.
  • The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure.
  • Save the test including data results and load-time graph.
  • Data storage up to 10000 specimens
  • Units: SI, Metric, Imperial.
  • Menu driven software for easy operation.
  • Load vs time plot and instantaneous load rate.
  • With PC Data logger software for test control and take test report printout through Thermal Printer.
  • Accurate load rate control within ±5 from 1kN/sec to 20 kN/sec.
  • Class 1 starting from 10% of the full range.
  • Dual stage pump assuring fast piston approach and precise test execution.
  • Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22.
  • Controllable pace rate from 1 KN/Sec to 10 KN/Sec.
  • Inbuilt graph in the touch screen display.
  • Auto stop and auto release after completion of each test.
  • Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale.
  • Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp.
  • Allow remote verification of settings and performances.
  • For easy debugging of unexpected malfunctions.
  • Complete IP based controller.
  • Max pressure valve to avoid machine overloading
  • Ram travel switch to prevent excessive piston travel
  • Front and rear gates for safety
  • Emergency stop button
  • Software controlled maximum load value
  • Working on 240V, 50-60Hz, single phase.

PRODUCT VIDEO

WORKING PRINCIPALNew

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE