OVERVIEW
SPECIFICATIONS
FEATURES
VIDEO
New
WORKING PRINCIPAL

OVERVIEW

The digital compression testing machine has been designed to meet the need for a simple and economic means to test concrete for its compressive strength.

Loading Unit

The loading unit consists of a four pillar type load frame with adjustable screw to adjust the height of the platen as per the sample size

The Hydraulic jack is fixed to the base. The platen of the machine are hardened ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens. Platen is adjustable with adjusting screw. The machine is equipped with Manual pace rate controller. The pace rate of the machine is manually increased or decreased with slow / fast Oil pressure valve.

The Loading capacity is of 1000 KN, Cubes up to 150 mm can be tested.

The pump facilitates rapid approach of the platens for daylight closure and also provides Manual control over the application of load. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch.

NOTE : Use of 3 KVA Three Phase Servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty void in case of any damage due to power fluctuations.

SPECIFICATIONS

Type of Pumping	Electrical
Loading Range	1000 KN
Least count	0.1 KN
Ram dia	170 mm
Ram Travel in mm	50 mm
Platen dia	200 mm
Horizontal clearance:	250 mm
Vertical daylight in mm	300 mm
Overload Protection	Yes
Sort circuit protection	Yes
Pump Speed	Dual speed
Motor	Induction Motor
Reading	Digital
Accuracy	± 1%
Release valve operation	Manual
Auto stop after failure of specimen	Available, Machine stops after completion of test
Holding of Max. Load	Available
Pace Rate or Rate of Loading indication	Yes available
Operator skill to control Pace Rate	Required
Bar Graph	Yes it will be displayed on the second line of the indicator
Multi Channel operation	Not Available
Load indication and Control	Digital membrane key pad controller
Saving of records	Not Available
Pen drive slot	Optional
Real time graph	Not Applicable
Printer interface (Direct connectivity to printer w/o computer)	Not Applicable
Computer operation software and data Acquisition software	Not Applicable
Displacement controlled operation	Not Available
Modulus of Elasticity Calculation	Not Available
Flexural attachment	Possible, all calculations will be made manually
Splitting Tensile Test	Possible but manual calculation required
LAN Connectivity	Not Available
Auto internal Calibration without proving ring	Not Available
Piston over travel safety cut off	Not Available
Over load safety cut off	Available
Overall Dimensions	450 X 410 X 1000 (L X W X D) mm
Net weight (in kg)	350 kg

FEATURES

Compressive Testing Machine Features:

Large alphanumeric LCD display with backlight
Sample Area digitally settable
Stress at Peak load calculated & displayed
Peak/Normal mode selectable
Buzzer alarm for peak detection in Peak Mode
Relay output for load limit detection
Digital tare provided
Non-volatile memory for saving configuration
Configuration lock at the rear to prevent tampering
Aesthetically designed front panel with membrane switches

Our Verticals

Our Company

Support